คำอธิบาย

Teison – สถานีชาร์จรถยนต์ไฟฟ้าแบบ DC Charger ขนาดกำลังไฟ 240 kW

DC EV Charging Station

Input over/under voltage protection, output over-voltage protection, output over current protection, insulation detection protection, battery reverse connection protection, short circuit protection, charging pile over-temperature protection, charging gun over-temperature protection, access control protection, emergency stop protection, leakage protection, Overcharge protection.

DC Fast Charger

The TS-EDC240-001 DC fast charger is a device that provides output DC directly to the car’s battery. The onboard device within the EV will not have to convert an AC to DC because batteries are always charged on DC.

Because the onboard device doesn’t have to convert the DC, the charging becomes way faster than any other level 1 or level 2 chargers. DC fast chargers are now more in demand because of more EV cars sold and more consumers. Thus no one would like to line up in a queue for hours to charge their vehicle.

The TS-EDC240-001 is the fastest charging station based on DC EV Charger. The term specifies that your car’s onboard (the device that converts AC into DC) doesn’t need to convert electricity, and hence it saves your time when you use DC EV Charger. These chargers are widely used in commercial arrears or require fast charging. They need a particular grid and installation.

Specification
Model		TS-EDC150AA TS-EDC150AA/AC43	TS-EDC180AA TS-EDC180AA/AC43	TS-EDC240AA TS-EDC240AA/AC43
Electrical Properties
AC Input	Input Rating	AC400V(±15%)3ph
	AC Input Connection	3P+N+PE
	Rate Input Current	3Φ250A	3Φ300A	3Φ400A
	Frequency	50/60Hz
	Power Factor	≥0.99
	Efficiency	≥95%
DC Output	Output Voltage Range	200V-1000V
	Max Output Current	500A（system）	600A(system)	800A（system）
	Max Output Power	DC150kW	DC180kW	DC240kW
	Voltage Accuracy	≤±0.5%
	Current Accuracy	≤±1%
User Interface & Control
Display		10.1″touch screen
Screen Material		LCD
Push Buttons		Operation buttors /Emergency buttons
User Authentication		RFID,OCPP,QR code,Password Application
Support language		English (Other languages available upon request)
Communication
External		Ethernet,WIFI,3G/4G
Intemal		CAN,RS485,RS232
Environmental
Operating Temperature		-30℃-+50℃
Humidity		<95% relative humidity,non-condensing
Altitude		≤2000m(6000 feet)
Mechanical
Ingress protection		IP55
Enclosure Protection		IK10
Cooling		Air forced
Installation Method		Wall-mount
Protection
Protection		Over current, Under voltage,Over voltage,Residual current, Surge protection,Short circuit,Over temperature,Ground fault
Regulation
Certificate		CE/CB
Standard		EN IEC 61851-1:2019;EN 61851-23:2014;EN 61851-24:2014; EN IEC 61851-21-2:2021

Technical characteristics

The rate power of AC/DC combo EVSE controller (CCS standard) is 240KW, and it can be used for rapid charging of electric vehicles. The functions include power conversion, charging control, PLC communication, energy measurement, charging billing. The intelligent multi-charge can provide dynamic distribution and allow several standards of electric vehicles to charge. It has the function of constant current or voltage charging, which is suitable for high voltage lithium system. With dustproof and waterproof functions (protection grade: IP55), it is suitable for outdoor operation. It can be set in parking lots, tram stations, service areas of expressways and supermarkets.